Air Conditioning Specialists Bedford
Domestic & Commercial  
Air Conditioning 
creating the right climate 

Mitsubishi Heavy Industrial Air Conditioning SRK25ZMP-S Wall Mounted 2.5 kW / 9000 Btu Heatpump Inverter Split Type Air conditioning system 

MITSUBISHI HEAVY INDUSTRIES has made a giant leap forward in air conditioning and heat pump technology, with the latest introduction of high performance SRK ZMP Wall Mounted air conditioning systems. 
 
The NEW ADVANCED SRK Wall Mounted Indoor Units have a new ‘smooth line’ design of fascia, which has a lower profile flatter appearance, and is far more easy to keep clean. The SRK now includes the Mitsubishi innovative NATURAL ENZYME FILTER which destroys funghi, bacteria and viruses. This, combined with the main Photocatalytic Washable Deodorizing Filter, provides healthy clean air 
for the occupants. 
 
MITSUBISHI has used its innovative technology of compressor design, and the ozone friendly R410A refrigerant, and combined this with their new “jet-flow” low noise air movement fan arrangement. The result is a quiet, high performance cooling and heating system, with advanced electronic controls for maximum comfort, controllable and energy efficient. 
 
ZMP Series 
The new slim profile indoor unit has a reduced height of 262mm, allowing installation above door openings and windows. The new multiple stage heat exchanger is folded to form a surround to the upper section of the fan enclosure. This ensures low air velocity, and reduced sound levels, whilst delivering high performance and efficiency. 
 
Mitsubishi air conditioning, Mitsubishi srk air conditioning, Mitsubishi srk50-zg, Mitsubishi air conditioning, Mitsubishi srk air conditioning, Mitsubishi srk50 
 
Product Key Feature's 
 
• High CoP, up to 3.82 
• New advanced technology control 
• Infra-red controller with wall mounting 
bracket 
• Reduced height slim construction 
• Pipe runs up to 15 metres 
• Low noise – 23dBA on smaller models 
• Back-up switch for loss of controller 
• Cold draft prevention on heat pump 
start up 
• Fault diagnosis 
• Auto re-start after power interruption 
• PRE-CHARGED WITH REFRIGERANT for 
up to 10 metres pipe length 
• Low power requirements 13A fuse. 
• Horizontal and vertical vane swoop 
 
Technical Specification: 
 
Indoor unit SRK25ZMP-S 
Outdoor unit SRC25ZMP-S 
Power source 1 Phase, 220 - 240V, 50Hz 
Nominal cooling capacity (Min~Max) kW 2.5(0.9~2.8) 
Nominal heating capacity (Min~Max) kW 2.8(0.8~3.9) 
Power consumption Cooling/Heating kW 0.78 / 0.755 
EER/COP Cooling/Heating 3.21/3.71 
Inrush current 220/230/240 V A 3.9 / 3.8 / 3.6 
Max. running current 9 
*Sound power level Indoor Cooling/Heating 
 
dB(A) 59 / 58 
Outdoor Cooling/Heating 60 / 59 
*Sound pressure level 
Indoor Cooling (Hi/Me/Lo) 45 / 34 / 23 
Heating (Hi/Me/Lo) 43 / 34 / 26 
Outdoor Cooling/Heating 47 / 45 
 
Air flow 
Indoor Cooling (Hi/Me/Lo) 
m3/min 10.1 / 7.3 / 4.2 
Heating (Hi/Me/Lo) 9.5 / 7.3 / 5.2 
Outdoor Cooling/Heating 26.0 / 19.7 
Exterior dimensions Indoor HeightxWidthxDepth mm 262 x 769 x 210 
Outdoor 540 x 645(+57) x 275 
Net weight Indoor / Outdoor kg 6.9 / 25 
Ref.piping size Liquid/Gas ø mm 6.35(1/4") / 9.52(3/8") 
Refrigerant line (one way) length m Max. 15 
Vertical height differences Outdoor is higher/lower m Max. 10 / Max. 10 
Outdoor operating temperature range Cooling ˚C -15~46 
Heating -15~21 
Clean filter